Update:

Performs the update of the GUIDE Plus+ schedule for the GUIDE Plus+ system (only available in some countries).

Postcode:

Sets your postcode to receive local information in the GUIDE Plus+ system (only available in some countries).

System Information:

Displays the system information of the GUIDE Plus+ system (only available in some countries).

●● DVB-T and Analogue channels are displayed on the same TV Guide screen. D and A may be displayed to distinguish DVB-T and Analogue channels. There will be no programme listings for Analogue channels.

Timer Programming

This function allows you to select programmes that you want to be reminded to watch or record to the USB HDD.

1.Select the forthcoming programme with / / / and press OK to access.

2.Select USB HDD Rec. / Reminder with / and press OK to set.

●● To check / change / cancel a timer event

Recording > Timer Programming > Editing Timer Programming

●● LED will turn to orange in Standby mode if Timer Programming is set. ●● To return to TV Guide

BACK/RETURN

●● If you select the current programme, a confirmation screen asking whether you want to watch or record the programme appears. Select Timer Programming with / and press OK to set USB HDD Rec. to record from the time you finish the timer event setting.

●● is displayed on the TV Guide screen if Timer Programming is set from TV Guide.

●● Depending on the country you select, you can set Signal Supported Recording (see below).

- 79 -