Remote recording

You can set timer programming events of this TV on the network equipment (smartphone, etc.) from outside the home network.

●● Ensure the network connections and network settings are completed.

Network > Network connections

Network > Network settings

●● Set TV Anywhere to On.

Network > Network settings > TV Anywhere Settings

●● Additional information for the services may be found on the following website.

http://panasonic.net/viera/support (English only)

= Note =

●●

●●

This function is not available when the TV is turned off with Mains Power On / Off switch.

Depending on the network condition, this function may not be available.

Note

●● TV Guide may also be used to set timer event.

Watching > TV Guide > Timer Programming

●● Timer Programming can store up to 15 events.

●● Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or service provider.

●● For recording using Timer Programming, the TV must be either on or in Standby. For reminders to be displayed, the TV must be on.

●● Depending on the progress of recording, analogue channel may not be selected.

●● Recording an encrypted (copy-protected) programme may not be possible.

●● 2 minutes before the start time, a reminder message may appear if you are watching TV.

–To remove the message and start the programming, press OK.

–To cancel the programming, press EXIT.

●● LED will turn to orange in Standby mode if Timer Programming is set.

●● Reminder messages will remain displayed until one of the following occurs:

–You press OK to view the programme or EXIT to cancel the reminder.

–The timer event that the reminder is set for ends.

- 116 -