■■DVB-T

1.Select a channel with / and adjust frequency with / for each channel.

●● Set where the level of Signal Quality becomes the maximum. 2. Press OK to search.

■■Analogue

Set Analogue channel manually after Auto Setup.

●● Set Sound System and Colour System, and then perform this function. Normally set Colour System to Auto.

–SC1: PAL B, G, H / SECAM B, G

–SC2: PAL I

–SC3: PAL D, K / SECAM D, K

–F: SECAM L, L’

1.Select the channel position with Numeric buttons.

2.Select the channel with Channel Up / Down.

3.Search with / .

4.Select Store with / and press OK to set.

●● Use Fine Tuning to make small adjustments to the tuning of an individual programme (affected by weather conditions, etc.).

●● If a VCR is connected only with the RF cable, select channel position 0.

- 103 -