No image can be displayed

●●

●●

Check the correct input mode is selected.

Check the setting of AV2 (COMPONENT / VIDEO) in Input Selection to match the output of the external equipment.

Watching > External equipment

●● Is Contrast, Brightness or Colour in the Picture Menu set to the minimum?

Watching > For best picture > Basic settings

●● Check all required cables and connections are firmly in place.

Blurry or distorted image (no sound or low volume)

●● Reset channels.

Watching > Tuning and editing channels > Auto Setup

There may be red, blue, green and black spots on the screen

●● This is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel is built with very high precision technology giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of red, green, blue or black. Please note this does not affect the performance of the panel.

- 253 -