1.Display the menu with MENU.
2.Select Sound with 
/ 
and press OK to access.
3.Select one of the following items with 
/ 
and press OK to access.
MPX / Audio Preference / SPDIF Selection / SPDIF Delay / HDMI Input / DisplayPort Input / ARC Output
4.Set with 
/ 
and press OK to store.
MPX
Selects multiplex sound mode (if available).
Stereo:
Use this normally.
Mono:
When stereo signal cannot be received
M1 / M2:
Available while mono signal is transmitted ●● For Analogue
Audio Preference
(Auto / Multichannel / Stereo / MPEG)
●● Selectable options vary depending on the country you select. Selects the initial setting for audio tracks.
Auto:
Automatically selects the audio tracks if a programme has more than two tracks. The priority is given in the following order - Dolby Digital Plus,
Multichannel:
The priority is given to
Stereo:
The priority is given to stereo (2ch) audio track.
MPEG:
The priority is given to MPEG.
●● Dolby Digital Plus and Dolby Digital are the methods of coding digital signals developed by Dolby Laboratories. Apart from stereo (2ch) audio, these signals can be
- 73 -