Using Common Interface

The Common Interface Module menu provides access to software contained in Common Interface (CI) Modules.

●●

●●

This function may not be available in some countries or regions.

Video and audio signals may not be output depending on broadcasts or services.

Although CI module may enable you to view some services, this TV does not guarantee all services (e.g. encrypted pay-TV channels). Please use only the broadcaster-approved CI module. Consult the operator / broadcaster or CI module manufacturer for more information and conditions of the services.

■■Insert the CI module (optional)

●● Normally encrypted channels will appear. (The viewable channels and its features depend on the CI module.) If encrypted channels do not appear, take the following steps.

●● For more details, read the manual of the CI module, or check with the content provider.

1.Display TV Selection with TV.

2.Select the mode with / and press OK to set. DVB-C / DVB-T

3.Display the menu with MENU.

4.Select Setup > Common Interface with / and press OK to access.

5.Select Slot 1: / Slot 2: with / , press OK and follow the on-screen instructions.

●● On-screen instructions may not correspond to the remote control buttons.

●● You can also select the CI module to watch the encrypted channels from CAM Selection.

Watching > Basic > Option Menu

= Note =

●●

●●

To tune in the encrypted channels properly, ensure the appropriate CI module is inserted and selected.

To use this function fully (watching, recording, etc.), insert the same CI module for each slot.

- 217 -