New Channel Message

(On / Off)

Selects whether to give a notification message when a new channel is found or not.

Watching > Tuning and editing channels > New Channel Message

●● For DVB

Service Replacement (On / Off)

Set to On to display a message to switch to the available service (only available in some countries).

Watching > Tuning and editing channels > Other settings

●● For DVB-C

Signal Condition

Checks the signal condition.

Watching > Tuning and editing channels > Signal Condition

●● Not valid in Analogue

Antenna System

(One LNB / MiniDiSEqC / DiSEqC 1.0 / Single Cable)

Sets the antenna system to use plural LNBs for receiving several satellites.

Watching > Tuning and editing channels > Auto Setup

●● For DVB-S

LNB Configuration

Selects the satellite for each LNB.

Watching > Tuning and editing channels > Auto Setup

●● For DVB-S

Attenuator

(On / Off)

Automatically reduces the DVB-C signal to avoid the interference.

Watching > Tuning and editing channels > Other settings

- 245 -