= Note =
●●
●●
●●
●●
Not valid in Analogue
Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or service provider.
Depending on the progress of recording, analogue channel may not be selected.
When recording programmes to the USB HDD, be sure to format the USB HDD and enable it to record in USB Device Setup.
Recording > USB HDD setup
●● To set timer programming events of this TV on the network equipment (smartphone, etc.) from outside the home network
Recording > Timer Programming > Remote recording
Signal Supported Recording is Timer Programming which is controlled by information from the TV Guide; if programme start and end times are changed by the broadcaster, the timer event will follow the change. Note that Signal Supported Recording only works reliably if correct information is received from broadcasters.
●●
●●
The availability of this function depends on the country and TV mode you select.
is displayed on the timer event if Signal Supported Recording is set.
= Note =
●● If you edit the start time or end time of a signal supported recording event by more than 10 minutes, it will no longer follow the broadcaster’s changes to the start or end time. The start and end times will become fixed.
- 80 -