Panasonic UF-7200 manual Precaution, Ventilation, Handling

Precaution

•Copyright material or trademarks without the consent of the owner

•Postage stamps and other negotiable instruments

This list is not inclusive and no liability is assumed for either its completeness or accuracy. In case of doubt, contact your legal counsel.

Notice:

Install your machine near a supervised area to prevent illegal copies from being made.

Ventilation

„The machine should be installed in a well-ventilated area to minimize the ozone density in the air.

Handling

„Do not disconnect the power cord from the machine or open the Right Cover during copying/ printing.

„Energy Saver Mode Notice

•When using the Printer Function (USB Local and Network Connections), we recommend that you leave the Energy Saver Mode in the initial factory default setting (Sleep mode).

„Key Operator ID Code

•The Initial Machine Modes can be checked or changed with the Function Modes, however, these modes require the Key Operator ID Code.

For Key Operator:	When setting up this machine, please consult with your authorized Panasonic dealer,
	and decide on the Key Operator ID Code together, then record it and keep it in a safe
	place for future reference.

„Dept. (DEPARTMENT) Code

INPUT DEPT CODE

********

1 to 8-digit

When the Department Counter function is set up, the Dept. (Department) Code input screen is displayed on the LCD Display. A registered Department Code (1 to 8-digit) is required to gain access to each secured function, or the secured Fax/ Scanner function(s) cannot be used. Please consult with the Key Operator regarding the Department Code(s) for the desired function.

Procedures:

(1)Input a registered department code (1 to 8-digit).

(2)Press the SET or START Key.

„Number of Copies

The maximum number of copies is up to 999 (3 digit with keypad). During the copy mode, if you input 4-8 digit numbers, they will be interpreted as being a phone number and displayed on the LCD, then the machine will switch to the Fax mode.

„Auto Reset Timer

As the initial setting for Auto Reset Time is 1 minute, selected operation mode returns to default operation mode (Fax) after 1 minute, if you wish to change this Auto Reset Time, set to Fax Parameter No.121 (AUTO RESET TIME). For more details for Fax Parameter, refer to the Operating Instructions (For Advanced Operations) on the provided CD-ROM.

10