Panasonic UF-7200 Problem Solving, If You Have Any of These Problems, Mode Symptom Cause / Action

Problem Solving

If You Have Any of These Problems

Mode	Symptom	Cause / Action	Page
During Installation	The display is	The backup capacitor is completely discharged.	29
	blinking	After setting the clock, the blinking will stop.
During	Document doesn’t	1. Check that your document is free of staples and paper	--
Transmission	feed/multiple feed	clips, and that it is not greasy or torn.
		2. Check that your document is the right type to send	--
		through a fax machine. If your document has the
		characteristics listed, make a photocopy of your
		document and send the copy instead.
		(Refer to the Operating Instructions (For Advanced
		Operations) on the provided CD-ROM.)
		3. Check that the document is loaded properly.	32
		4. Adjust the ADF Pressure.	--
	Document jam	The information code 031 will appear on the display if the	46
		document becomes jammed.
	Does not stamp	Check Fax Parameter No.04 (STAMP (HOME)) and No.28	--
		(STAMP AT MEM. XMT) settings.
		(Refer to the Operating Instructions (For Advanced
		Operations) on the provided CD-ROM.)
	Stamp too light	Replace stamp.	--
		(Refer to the Operating Instructions (For Advanced
		Operations) on the provided CD-ROM.)
During Reception	Recording paper jam	The Jam Error code J01, J02, J43 or J44 will appear on the	46,
		display if the paper gets jammed.	47,
			49,
			51
	Recording paper	Make sure that there is paper in the Paper Tray. Follow the	21
	doesn’t advance into	instructions for loading paper.
	machine
	Recording paper	Check to see if the recording paper is jammed inside of the	46,
	doesn’t eject after	machine.	47,
	printing		49,
			51
	Recording papers	1. Check if Fax Parameter No.65 (PRINT COLLATION) is	--
	are not stacked in	set valid.
	sequence. Machine	(Refer to the Operating Instructions (For Advanced
	does not print from	Operations) on the provided CD-ROM.)	--
	the last page	2. If memory becomes full during reception, the machine
	received.	will start to print from the 1st page received. We
		recommend that optional SD memory card is installed if
		this symptom occurs frequently.
	Document auto	Check Print Reduction settings.	--
	reduction doesn’t	(Refer to the Operating Instructions (For Advanced
	work	Operations) on the provided CD-ROM.)
	Out of toner	The User Error code U13 will appear on the display if the	40,
		Toner Cartridge runs out of toner.	46

44