Replacing Consumables | Panasonic UF-7200 guide

Replacing Consumables

5 Make sure that the paper is set properly and it

does not exceed the Max. Level Indicator.

ENGLISH

6 Insert the tray into the machine until it stops.

NOTE

1.When the optional Tray-2 is installed and the same size of paper is loaded in both trays, the paper will be supplied from Paper Tray-1 first. This is the default setting, if you wish to change the setting, please consult with your authorized Pana- sonic dealer.

2.After setting the maximum allowed number of copies for each department, consult with your Key Operator when the total copy count reaches the designated limit and the "MAX COPIES ALLOWED" message appears on the LCD.

3.If output sheets are curled, or not properly aligned, remove the paper from the paper tray, turn it over, and replace it in the paper tray.

39

Image 39

Panasonic UF-7200 manual Replacing Consumables, Insert the tray into the machine until it stops

Contents

Operating Instructions For Basic OperationsModel No. UF-8200 Operating Instruction „ Functions and OptionsStandard Option How to Read This Manual Operating InstructionFollowing notations are used throughout this manual Table of Contents Safety Information For Your SafetyPower and Ground Connection Cautions Operating Safeguards Consumable SafeguardsSafety Information Others Installation and Relocation Cautions Safety Information Supplies PrecautionFor Your Safety Installation Precaution VentilationHandling „ Caution Label Precaution „ Laser Safety Important Safety Instruction Security Suggestions for Key Operators Recording Paper Tray Main Unit and AccessoriesTelephone Line Cable Power Cord Directory Sheet Holder Operating Instructions External View Control Panel Control Panel „QWERTY Keyboard Character Keyboard Icon Contents „Status LED RED „Print Data LED Green Unpacking Installing Your Machine Unpacking Remove All Shipping Tapes and All Packing Materials Load Paper Pull out the tray until it stopsFor Tray-1/Tray2 Unpacking Install the Toner Cartridge Unpacking Optional Telephone Handset Jack or External Telephone Jack Installing Your Machine For Tone Setting the Dialing Method Tone or PulseEnter the Key Operator ID using the Number Pad, then press For Pulse Setting the Monitor Volume Adjusting the Volume Adjusting the Volume Setting the Ringer Volume User Parameters For Facsimile Setting the User Parameters Ex 201 555 User Parameters For FacsimileEx Panasonic Ex Head Office Programming Auto Dialer Setting Your Machine Document Width How to Place DocumentsScanning Area Document Size Manual Number Dialing Sending Documents Sending Documents Quick Name Search Dialing „ Routing What is Internet Fax?„ Sending Email „ Receiving Email Internet Paramaters User Parameters Using the Internet Fax FeatureWhat is Internet Fax? User Information Ex InternetFax@fax01.panasonic.com Internet Paramaters User Parameters for IPv6 environment Adding Paper Paper Trays Tray-1 and Tray-2 Replacing Consumables Insert the tray into the machine until it stops Replacing Consumables „ Low Toner message will follow this progression Replacing the Toner Cartridge „ Replacing the Toner Cartridge Open the Right Cover of the machinePush up the Cartridge, and then pull it out Insert the Toner Cartridge until it stops, Replacing Consumables Problem Solving If You Have Any of These ProblemsMode Symptom Cause / Action Problem Solving UserU / JamJ Error Codes „ Jam Error Codes J Code„ User Codes U Code „For J01, J02 Removing a Misfed Paper Paper Feed/Paper Transport „ When the optional Tray-2 is installed „For J43, J44 Removing a Misfed Paper Inside the Machine Then push it down „For J71, J72, J74, J75, J92, J93 Removing a Misfed Document ADF Info Meaning Possible Action Code Information Code Machine will only redial once Problem Solving English FCC Notice for Users in USA FCC Notice FCC Notice Date and TimeID Number FCC Notice Avis Memo Important Information For Service, Call Warranty