Panasonic VDR-D150GN operating instructions 106

LSQT1052(ENG).book 106 ページ ２００５年１２月２１日 水曜日 午後６時５０分

Troubleshooting

Problem

Check points

≥Are you trying to record small or finely detailed objects with [PICT. QUALITY] set at [ ]?

Recorded still pictures	# If you try to record small or finely detailed objects with
are not clear.	[PICT. QUALITY] set at [	], the images may break up into

amosaic-like pattern. Record with [PICT. QUALITY] set at [ ] instead. (l 42)

The images on the SD	≥ The data may be destroyed. It may have been destroyed by
	static or electromagnetic waves. Store important data on a
card do not look normal.
	computer or other products as well.
Even if a disc or a card is	≥ Either this unit or the disc or card may be damaged. Please
formatted, it cannot be	consult a dealer.
used.
The indication	≥ Turn off the power to this unit. If the power cannot be
disappears.	turned off, press the RESET button, or remove the battery
The screen is frozen.	or AC adaptor and then reattach it. After that, turn on the
	power again. If normal operation is still not restored,
No operation can be
	detach the power connected, and consult the dealer who
performed.	you purchased this unit from.
	≥ The unit has automatically detected an
	error. Press the RESET button with the
	projecting part of the lens cap. This will
	restart the unit.
	≥ If you do not press the RESET button,
“PUSH THE RESET	the power to this unit is turned off
SWITCH.” is displayed.	automatically about 1 minute later.

≥Even after you press the RESET button, the indication may still appear repeatedly. If so, this unit needs repair. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the appliance by yourself.

Others

106

LSQT1052