Recording
Manual recording functions
57
LSQT1052
Select [ ] mode, fill the screen with a white subject and then move the joystick up to select [ ].When the [ ] display changes from flashing to on, setting is complete.
≥When the [ ] display continues flashing green, the white balance
cannot be set because the place is dark etc. In this case, use the
automatic white balance.
∫About the white balance sensor A
The white balance sensor detects the type of light source during
recording.
Do not cover the white balance sensor during recording, or it may
not function properly.
≥When the [ ] display flashes white, the manual
white balance previously adjusted is stored.
Whenever recording conditions change, re-set t he
white balance for correct adjustment.
≥When the unit is turned on with the lens cap fitted,
the automatic white balance adjustment may not
function properly. Please turn the unit on after
removing the lens cap.
≥When setting both the white balance and the iris/
gain, set the white balance first.
To set the white balance manuallyMNL
A
LSQT1052(ENG).book 57 ページ 2005年12月21日 水曜日 午後6時50分