LSQT1052(ENG).book 91 ページ 2005年12月21日 水曜日 午後6時50分

With a printer (PictBridge)

With a printer (PictBridge)

(SD)

To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.)

Use the AC adaptor to free you from worrying about the battery running down.

¬Insert an SD card with recorded images in the unit, turn on the unit and then rotate the mode dial to select .

1Press the MENU button, then select [ SETUP] # [ USB FUNCTION] # [PictBridge] and press the

joystick.

Press the MENU button to exit the menu screen.

2 Connect this unit and a printer.

AUSB cable (not supplied)

Insert the plugs as far as they will go.

[ ] indication appears.

If the [ ] indication does not appear or

continues to flash, disconnect and then reconnect the USB cable or check the printer, SD card and settings on this unit.

A

3 Select a file to be printed, then press the joystick.

The number of pictures set is displayed.

With other products

91

LSQT1052

Page 91
Image 91
Panasonic VDR-D150GN With a printer PictBridge, Connect this unit and a printer, Number of pictures set is displayed