Panasonic VDR-D150GN operating instructions Messages

LSQT1052(ENG).book 99 ページ ２００５年１２月２１日 水曜日 午後６時５０分

	Indications
Messages
CANNOT RECORD.	Data writing to the disc or card has failed.
NO DATA.	There are no images recorded on the disc or card.
INCOMPATIBLE DISC.	You inserted an incompatible disc (copy-protected discs, etc.).
PLEASE CHECK THE	You inserted a disc that cannot be read on this unit (a disc
DISC.	recorded in NTSC video format etc.).
	If this message appears when a disc is inserted, the disc may
FOR BEST	be unrecordable. It is recommended that you use Panasonic
	discs, since their compatibility with this unit has been confirmed.
PERFORMANCE
	Refer to the Panasonic web site for information about disc
PANASONIC DISC IS
	compatibility etc.
RECOMMENDED.
	http://panasonic.co.jp/pavc/global/cs/e_cam
	(This website is in English only.)
CANNOT RECORD.	A finalized DVD-RW (Video format) or DVD-R has been
	inserted. After finalizing, the discs become play-only and cannot
(THIS DISC IS FINALIZED)	record. If you un-finalize a DVD-RW (Video format), it can be
	used for recording. (l 84)
CANNOT RECORD. DISC
IS FULL.	The disc is full or the number of scenes has reached the
CANNOT RECORD. THE
	maximum limit so no further data can be recorded. Delete
NUMBER OF SCENES HAS	unnecessary scenes (l 64) or insert a new disc.
EXCEEDED THE MAXIMUM
LIMIT.
INTERNAL TEMPERATURE	The temperature of the unit is high so it cannot be operated.
TOO HIGH. PLEASE TURN
	Turn off the power, wait until the unit cools and then turn on the
UNIT OFF AND WAIT A
	power again.
WHILE.
	DVD-R cannot be un-finalized.
CANNOT UN-FINALIZE	DVD-RW (VR format) cannot be un-finalized. DVD-RW (VR
THIS DISC.	format) after finalization can be recorded and edited in the same
	way as DVD-RW (VR format) before finalization.
		Others

99

LSQT1052