Panasonic VDR-D150GN Select the layout setting on page Layout, When you stop printing halfway

LSQT1052(ENG).book 93 ページ ２００５年１２月２１日 水曜日 午後６時５０分

With a printer (PictBridge)

8 Select the layout setting on [ PAGE LAYOUT].

STANDARD: Layout specific to the printer

: No frame print

: Frame print

≥You cannot set page layouts not supported on the printer.

9 Select [PRINT] # [YES] and press the joystick.

The pictures are printed.

≥Exit PictBridge by disconnecting the USB cable after the pictures have been printed.

When you stop printing halfway

Move the joystick down.

A confirmation message appears. If [YES] is selected, the number of prints set is cancelled and the screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to step 3.

≥Avoid the following operations during printing. These operations disable proper printing.

–Disconnecting the USB cable

–Removing the SD card

–Switching the mode dial

–Turning off the power

≥Check the settings for the paper size, quality of print, etc. on the printer.

≥You cannot print pictures that cannot be played on this unit.

≥When the unit is connected directly to the printer, the DPOF settings cannot be used.

≥Connect the printer directly to this unit. Do not use a USB hub.

With other products

93

LSQT1052