LSQT1052(ENG).book 11 ページ 2005年12月21日 水曜日 午後6時50分

Parts identification and handling

Fitting the lens cap

Fit the lens cap to protect the surface of the lens.

The lens cap and lens cap cord comes preattached to the grip belt.

≥ When not using the lens cap, pull the lens

B

cap cord in the direction of the arrow. A

 

≥ When you are not recording, be sure to

 

cover the lens with the lens cap for

 

protection. B

 

A

When you remove the lens cap, press the knobs firmly.

If the lens cap cord has come off

Pass the end of the lens cap cord through the attached eye

on the lens cap. Then pass the lens cap through the loop made by itself and pull tight.

Tripod receptacle

Before using

This is a hole for attaching the unit to the optional tripod.

(Please carefully read the operating instructions for how to attach the tripod to the unit.)

≥ When the tripod is used, the card slot cover cannot be opened. Insert an SD card before attaching this unit to the tripod. (l 25)

11

LSQT1052

Page 11
Image 11
Panasonic VDR-D150GN operating instructions Fitting the lens cap, Tripod receptacle Before using