LSQT1052(ENG).book 41 ページ 2005年12月21日 水曜日 午後6時50分

Recording still pictures

Recording still pictures

(SD)

Record the still picture on an SD card.

1 Remove the lens cap, then turn the unit on.

If the unit is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly.

2 Rotate the mode dial to select .

3 Press the PHOTO SHOT button.

The unit automatically focuses on the subject at the centre of screen (when auto focus is selected).

The size of pictures: 640k480 pixels

For information about the number of recordable still pictures on an SD card (l 115)

The sound cannot be recorded.

If the write protection switch on the SD card is set to LOCK, it cannot be used for recording.

If set [PICT. QUALITY] # [ ], mosaic-pattern noise may appear on a playback image depending on the picture content.

While the card access lamp is lit, do not perform the following, as doing so may damage the SD card or the data on the card.

Turn the unit off.

Insert or remove the SD card.

Operate the mode dial.

Another product may degrade or not play back still pictures recorded on this unit.

Recording

To record still pictures clearly

When zooming in on the subject with a magnification of 4k or higher, it is difficult to reduce the slight shaking from holding this unit by hand. We recommend decreasing the zoom magnification and approaching the subject when recording.

You can record stable pictures without shaking by using a tripod.

41

LSQT1052

Page 41
Image 41
Panasonic VDR-D150GN Recording still pictures, Rotate the mode dial to select Press the Photo Shot button