Panasonic VDR-D150GN Manual shutter speed/aperture adjustment, To restore to automatic adjustment

LSQT1052(ENG).book 58 ページ ２００５年１２月２１日 水曜日 午後６時５０分

Manual recording functions

Manual shutter speed/aperture adjustment

(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)

Shutter Speed: Adjust it when recording fast-moving subjects.

Aperture: Adjust it when the screen is too bright or too dark.

¬Rotate the mode dial to select or .

1 Set the AUTO/MANUAL/FOCUS switch to MANUAL.

The icon shown in the illustration is displayed automatically.

MNL

2 Move the joystick down several times and select

the shutter speed indication (such as 1/100) or iris/	MNL
gain indication (such as F2.4, 0dB).	1//10060
	OPEN
	OdB

Recording

3 Move the joystick left or right to make the adjustment.

AShutter speed:

1/50 to 1/8000

1/50 to 1/500

≥The shutter speed closer to 1/8000 (1/500) is faster.

B Iris/Gain value:

CLOSE # (F16 to F2.0) # OPEN # 0dB # 18dB

≥Value closer to [CLOSE] darken the image.

≥Value closer to [18dB] brighten the image.

≥Values with [dB] are gain values.

MNL

A

1//10060

B OPEN OdB

To restore to automatic adjustment

Set the AUTO/MANUAL/FOCUS switch to AUTO.

≥ When setting both the shutter speed and the iris/	≥ When recording in an extremely bright place, the
gain value, set the shutter speed and then set the	screen may change colour or flicker. If so adjust the
iris/gain value.	shutter speed manually to [1/50] or [1/100].

∫Manual shutter speed adjustment

≥Avoid recording under fluorescent light, mercury light or sodium light because the colour and brightness of the playback image may change.

≥If you increase the shutter speed manually, the sensitivity lowers and accordingly the gain value increases automatically, which may increase the noises on the screen.

≥You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject, but this is not a malfunction.

≥During normal playback, image movement may not look smooth.

∫Manual iris/gain adjustment

≥If the gain value is increased, the noise on the screen increases.

≥Depending on the zoom magnification, there are iris values that are not displayed.

58

LSQT1052