Precautions
Refer installation work to the dealer. Installation work requires technique and experi- ences. Failure to observe this may cause fire, electric shock, injury, or damage to this prod- uct.
Be sure to consult the dealer.
Stop the operation immediately when something is wrong with this product. When smoke goes up from the product, the smell of smoke comes from the product, or the exterior of the product has deteriorated, contin- ued use will cause a fire or fall of the product resulting in injury, accidents, or damage to the product.
Turn the power off immediately and contact qualified service personnel for service.
Do not attempt to disassemble or modify this product.
Failure to observe this may cause fire or electric shock.
Consult the dealer for the repair or inspections.
Do not insert any foreign objects.
Fire or electrical shock may be caused if water or any foreign objects, such as metal objects, enter inside the unit.
Turn the power off immediately and contact qualified service personnel for service.
Select an installation area that can sup- port the total weight.
Selecting an inappropriate installation surface may cause this product to fall down or topple over, resulting in injury.
Installation work shall be started after sufficient reinforcement.
Periodic inspections shall be conducted. Rust on the metal parts or screws may cause a fall of the product resulting in injury or acci- dents.
Consult the dealer for the inspections.
Do not use this product in an inflammable atmosphere.
Failure to observe this may cause an explosion resulting in injury.
Avoid installing this product in the loca- tions where salt damage occurs or corro- sive gas is produced.
Otherwise, the mounting portions will deterio- rate and accidents such as a fall of the product may occur.
The exclusively designed mount bracket shall be used.
Failure to observe this may cause a drop result- ing in injury or accidents.
Use the exclusively designed mount bracket for installation.
The screws and bolts must be tightened to the specified torque.
Failure to observe this may cause a drop result- ing in injury or accidents.
Install this product in a location high enough to avoid people and objects from bumping the product.
Failure to observe this may cause a drop result- ing in injury or accidents.
Turn the power off when wiring this prod- uct.
Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may cause fire.
Do not strike or give a strong shock to this product.
Failure to observe this may cause fire or injury. Shock resistance grade (50J
10
