Insert/remove an SD memory card
IMPORTANT:
•When inserting an SD memory card, make sure the direction.
•Before removing the SD memory card, select “Not use” for “SD memory card” on the
[SD memory card] tab of the “Basic” page first. Turn off the power after “Not use” selection, and then unload the SD memory card. When the SD memory card is inserted or removed with the power on, data in the SD memory card may be damaged. (☞ Operating Instructions (included in the
z Loosen the SD memory card slot cover fixing screw using the bit for tamperproof screw (accessory), then open the SD memory card slot cover.
x Insert an SD memory card fully into the SD memory card slot until a click is heard.
c Close the SD memory card slot cover, and tighten the SD memory card slot fixing screw to secure the cover. (Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})
IMPORTANT:
•Ensure that the SD memory card slot cover's fixing screw is firmly secured.
Failure to observe this may cause water leakage or malfunction.
SD memory card slot cover fixing screw
SD memory card slot cover
v When removing the SD memory card, push in | SD memory card slot |
the SD memory card until a click is heard after |
|
executing step 1, then pull it out from the SD |
|
memory card slot. After removing the SD mem- |
|
ory card, close the SD memory card slot cover, |
|
and tighten the SD memory card slot cover fix- |
|
ing screw to secure the cover. |
|
(Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}) |
|
| Label face upward |
24
