b Accommodate the connected cables inside the cable guide of the camera mount bracket.
IMPORTANT:
• To prevent the cables from being caught when the base cover (accessory) is attached, keep the cables inside the cable guide.
Cable guide | Connected cable | Cable guide |
n Attach the base cover (accessory) that was removed according the steps in page 20.
| Base cover |
| (accessory) |
m Use the bit for tamperproof screw (accessory) | Base cover fixing screws |
to tighten the fixing screws provided on both |
|
sides of the base cover (accessory). |
|
(Recommended tightening torque: |
|
0.78 N·m {0.58 lbf·ft})
,Remove the cover film from the dome cover.
33
