Preparations
When installing the camera on a ceiling or a wall, there are 3 methods as specified below.
• Using a
• | Installing the camera directly on the ceiling or wall SW458M (☞ page 19) |
• | Using the supplied mount bracket SW458 (☞ pages 20 to 23) |
IMPORTANT:
• Procure 4 screws (M4) to secure the camera attachment (accessory) or the mount bracket (accessory) SW458 to a ceiling or a wall according to the material of the installation area. Do not use wood screws and nails.
For mounting a camera on a concrete ceiling, use an anchor bolt (M4) or an AY plug bolt (M4) for securing. (Recommended tightening torque M4: 1.6 N·m {1.18 lbf·ft})
•Mount the camera attachment (accessory) in consideration of the camera angle in accordance with the instructions (☞ pages 18 and 19).
•Required
•If a ceiling board such as plaster board is too weak to support the total weight, the area shall be sufficiently reinforced.
The mounting conditions of the camera are described as follows:
Installation | Appropriate mount | Recommended | Number of | Minimum |
place | bracket | screw | screw | strength (per 1 pc.) |
Ceiling/wall | M4 | 4 pcs. | 196 N {44 lbf} | |
SW458M | (Direct mounting) | M4 | 4 pcs. | 196 N {44 lbf} |
Ceiling/wall |
|
|
|
|
SW458 | Mount bracket (accessory) | M4 | 4 pcs. | 196 N {44 lbf} |
Ceiling/wall* |
|
|
|
|
* The conditions for securing the mount bracket to a ceiling or a wall are described here.
17
