Do not rub the edges of metal parts with your hand.
Failure to observe this may cause injury.
Do not touch this product, the power cord or the connected cables during thunder (even in the process of work).
Failure to observe this may cause electric shock.
Keep SDXC/SDHC/SD memory cards (option) away from infants and children. Otherwise, they may swallow the cards by mis- take.
In this case, consult a doctor immediately.
Do not damage the power cable.
Do not damage, fabricate, twist, stretch, bun- dle, or forcibly bend the power cable. Do not place heavy objects.
Keep away from heat sources.
Use of the damaged power cable may cause electric shock, short circuit, or fire.
Consult the dealer for repair.
Turn the power off when cleaning this product.
Failure to observe this may cause injury.
[Precautions for use]
This product has no power switch.
When turning off the power, disconnect the power supply from the 12 V DC power supply or the PoE device. (When using both the 12 V DC power supply and the PoE device for power supply, disconnect both the connec- tions.)
To keep on using with stable performance Do not use this camera in hot and humid con- ditions for a long time. Failure to observe this causes component degradation resulting in life shortening of this product.
Do not expose the product to direct heat sources such as a heater.
Do not touch the dome cover with your bare hands.
A dirty dome cover may cause deterioration of picture quality.
Handle this product with care.
Do not drop this product, nor apply shock or vibration to the product. Failure to observe this may cause trouble. If a strong shock or vibra- tion is applied to the enclosure, it may cause damage or allow water to enter this product.
About the PC monitor
Displaying the same image on a monitor for a long time may damage the monitor. It is recom- mended to use a
When an error is detected, this product will restart automatically.
This product will be inoperable for around 2 minutes after the restart just as when the power is turned on.
Product disposal/transfer
Data saved on this product or a storage device used with this product may lead to personal information leakage. When it is necessary to dispose or give this product to someone, even when for repair, make sure that there is no data on this product.
Cleaning this product body
Be sure to turn off the power before cleaning. Failure to observe this may cause injury. Do not use strong abrasive detergent when cleaning this product. Otherwise, it may cause discoloration.
When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product.
Transmission interval
Image transmission interval may become slow depending on the network environment, PC performance, shooting subject, access num- ber, etc.
About SD memory card
• Before removing the SD memory card from the camera, it is necessary to select “Not use” for “SD memory card” first. The recorded data may be corrupted if the SD memory card is removed when “Use” is selected for “SD memory card”. Refer to page 24 for descriptions of how to insert/ remove an SD memory card.
• When using an SD memory card, format it using this product. Recorded data on the SD memory card will be deleted when for- matted. If an unformatted SD memory card or an SD memory card formatted with other devices is used, this product may not work properly or performance deterioration may be caused. Refer to the Operating Instructions on the provided
• When some SD memory cards are used with this product, the product may not work properly or performance deterioration may be caused.
11
