x Determine the direction of the mount bracket according to the installation environment (how the cables are wired, etc.) before mounting it to a ceiling or a wall by fixing 4 screws (locally pro- cured).
The direction of the camera in relation to the mount bracket is the 4 directions as shown in the illustration.
IMPORTANT:
•For mounting a camera on a concrete surface, use an anchor bolt (M4) or an AY plug bolt (M4) for installing. (Recommended tightening torque M4: 1.6 N·m {1.18 lbf·ft})
Note:
•The camera's direction is determined by the direction of the camera attachment (accessory) mounted to the mount bracket c.
Cable hole
The direction of the camera (4 directions)
Female thread for the conduit
<Using the cable access hole>
Open the camera access hole on the ceiling or wall as shown in the illustration. Align the cable hole of the mount bracket (accessory) to the hole, and mount the bracket to hole A or hole B on the ceiling or wall.
[For use of the hole A]
ø27 mm
{ø1-1/16 inches}
Cable access hole | 51 mm {2 inches} |
Cable hole
Center of mount bracket
Mount bracket (accessory)
Fixing screws
(4 pcs., locally procured)
21
