Installation

Camera mounting

Installation shall be conducted after turning off each device.

zAttach the camera attachment (accessory) on the ceiling or wall.

<Using a two-gang junction box>

Secure the camera attachment (accessory) to the two-gang junction box (locally procured). (Pages 18 and 19) <Installing the camera directly on the ceiling or wall> SW458M

Attach the camera attachment (accessory) using the installation template label (accessory). (Page 19) xConnect each cable. (Page 25) Waterproof the connecting portion. (Page 28)

cAlign the “OPEN” on the camera with the projection of the camera attachment (accessory).

v Engage the camera attachment fixing screws on the rear of the camera in the camera mounting holes of the camera attachment (accessory), and then rotate the camera in the direction of the arrow to secure the camera attachment and camera while storing the cables in the rear of the camera.

Rotate the camera until a click is heard so that the projection of the camera attachment (acces- sory) will be set to the “LOCK” position.

bSecure the camera with the camera fixing screw on the front view. (Recommended tightening torque: 1.37 N·m {1.01 lbf·ft})

IMPORTANT:

Ensure that the camera fixing screw is firmly secured.

Failure to observe this may cause a malfunction or the product to fall, resulting in injury or accidents.

Camera mounting hole

Projection

Camera attachment fixing screw

<Front view>

Camera ￿xing screw

30

Page 30
Image 30
Panasonic WV-SW458E, WV-SW458ME installation instructions Installation, Using a two-gang junction box