Step 5: Entering the Desired Legend:
The printer features a 2 line by 16 character LCD display. If the legend that you desire is greater than 16 characters long or greater than 2 lines high then you will not be able to view the entire legend at one time. Enter the desired legend via the keypad. Once you have completed the current line, press the ENTER Key to move the cursor to the start of the next line. It is not necessary to hit the ENTER Key on the last line of text. Use of the automatic legend repeat (See page 11) and serialization (See page 14) features can significantly reduce the time required to produce labels. If during legend entry an error is made, position the cursor over the incorrect character and press the CLR/DEL Key to delete that character. Press and release the SHIFT Key prior to pressing the CLR/DEL Key to clear the entire legend.
Step 6: Printing Your Labels
To print a copy of the currently selected label press the PRINT Key. This will print one set of the current selected labels. Pressing and releasing the SHIFT Key prior to pressing the PRINT Key will allow you to print multiple copies of the currently selected label. Multiple copies can also be selected in the SETUP menu. Pressing the PRINT Key during a print job will stop the print job.
SECTION 2: Using the
Step 1: Turning the Printer On:
See SECTION 1: Using the SETUP Menu, Step 1.
Step 2: Loading the Labels:
See SECTION 1: Using the SETUP Menu, Step 2.
10
