Panduit LS3E manual Ribbon Cartridge Removal, Printer Operation

➃TO REMOVE LIFT HERE

➂ROTATE MANUAL ADVANCE KNOB TO ALIGN WITH DRIVE PIN.

TEAR BAR

RIBBON

PRINT HEAD

RUBBER

DRIVE

ROLLER

➁PUSH DOWN

APPLY DOWNWARD PRESSURE ON SCREWS TO SECURE RIBBON CARTRIDGE IN PLACE

① LOCATE THE PRINT	PRINT
	SHIELD

HEAD IN CENTER OF

THE PRINTER

WHEN LOADING BE SURE THAT THE RIBBON IS LOCATED

BETWEEN THE PRINT SHIELD AND THE PRINT HEAD.

FIGURE 2

WARNING:

Do not operate the printer when the ribbon cartridge is not installed. This may cause damage to the print head.

RIBBON CARTRIDGE REMOVAL

To remove the ribbon cartridge, place your finger under the ribbon cartridge at the location shown in Figure 2 near the manual advance knob. Lift upward firmly until the cartridge snaps loose.

PRINTER OPERATION

The LS3E Printer is extremely versatile and is designed to accommodate all levels of experience. The user can view and select options through use of the SETUP menu. The experienced user can quickly configure the printer to the desired formats using the Quik-KeyTMoptions or if completing repetitive jobs can use the custom formatting option immediately after turning the printer on. The use of each of these options is covered below in Sections 1 through 3.

7