LENGTH FUNCTION
Although the length of the printed label automatically adjusts to fit the length of the entered text, there may be times when you will want to make a label with a specific length. The length function allows you to set the label length between 0.25" and 11.80" (6.4 and 299.7 mm).
The default length setting is O FF. If ON is selected, the Length indicator at the bottom of the display lights up. The default length when ON is 0.65" (16.5 mm) - the width of a Panduit Modular Jack.
To turn on or off the length function:
|
| Length |
1 | While holding down Code | , press Q once to display the current setting (ON or |
| OFF). |
|
|
| Length |
2 | While still holding down | Code , continue pressing Q until the desired label length |
setting is displayed.
☞The Length indicator lights up when ON is selected.
3 | Release Code . If ON was selected, the current label length setting is displayed. |
To set the length of the label:
4 Use the number keys to enter a length.
File
5 Press 
.
☞Cut marks are printed on the labels when Length Function is s et.
34
