Batteries, To change the batteries | Panduit LS7 instruction

BATTERIES

This lightweight and portable machine can be used anywhere by installing six (6) AA (AM3, LR6) alkaline batteries. When changing the batteries, always replace all six at the same time.

To change the batteries:

1Remove the back cover by pressing in on the rough area at the top end of the machine and pulling off the cover. Pulling off the back cover lifts up the tape release lever.

2If batteries are already installed, remove them.

3Insert six new batteries, making sure that they face the direction shown in the illustra- tion on the bottom of the battery compartment. The positive ends of the three batteries in the bottom row point towards the bottom of the machine, while the positive ends of the top three batteries point in the opposite direction.

4Attach the back cover by inserting the tab on the bottom end of the cover into the slot on the bottom end of the machine, then pushing down firmly on the top end of the cover until it snaps into place.

☞Be sure to insert the new batteries within five minutes of removing the old ones, oth- erwise the text shown in the LCD display and any text files stored in the memory will be lost (unless the machine is plugged into an electrical outlet with the AC adapter).

If alkaline batteries are not used, large fonts and barcodes cannot be printed.

8

Image 11

Panduit LS7 manual Batteries, To change the batteries

Contents

Page Contents Page Getting started Do Not Operate In Wet Or Damp Areas Introduction and Safe OperationSafe Operation Practices Do Not Operate In An Explosive Environment Information to USA Users Information to Canadian Users General Precautions Warranty Information Bottom View General DescriptionTOP View LS7 Keyboard & LCD Display To change the batteries Batteries To connect the optional AC adapter Optional AC Adapter To change the LS7 tape cassette Tape Cassette Tape Width Label CodeLabel Code Laminated Industrial Tape Laminated Industrial Tape Separator Tool Print Head & Rollers To clean the print head and rollers Print head Rollers Be careful not to touch the cutter blades with bare hands To clean the tape cutter bladesTape Cutter Carrying Case For your Information To turn off the machine Power KEYTo turn on the machine Code KEY Code & Caps Keys To type capital letters continuous ly Caps KEY Right Cursor KEY Cursor KeysLeft Cursor KEY Down Cursor KEY UP Cursor KEY To add a space Space KEY Is used to end a Return KEY To add a new line of text 1John Smith To apply a selected item 1DATA To delete a sequence of characters Backspace KEYTo delete one character To quit a function without changing your text To delete all of the text Clear Function To type in an accented character Accent FunctionAccented characters 1NOË AccentÈéëêe To type in a symbol Symbol FunctionSymbols 1PHONE To set the length of the label Length FunctionTo turn on or off the length function Length Length inch Tape width Sizes in points Setting Size PointsSize Function Tape Width Text 12 mm To change the size settingSize Auto While still holding down Code , con OFF To change the underline settingUnderline Function Underline To change the frame s etting Frame FunctionRound Slant DOT DOT Frame Left Horizontal Alignment FunctionLeft Center Right Alignment Mirror To change the mirror printing settingMirror Printing Function Copies Print KEY, Copies & Feed Functions To use the numbering function Serialization Function END Value SerializeNumeric Start Value Rotate Legend Function To enable the rotate legend function Increment Rotate Legnd Repeat Legend FunctionRepeat Legnd 01.00 Right Edge To enable/dis able the line functionLine Drawing Function Vertcl Line Increment by Press Function To enable the page function 1A207 Label To store a text file Memory File FunctionsStoring Text To recall a text file Recalling TextDeleting a File To overwrite the stored file with the new one Press Or pres s just BS Press the key File Store Recall File File Clear Barcode Function To add the barcode to your text To change the barcode parameter settingsSymbol Character To add a special character to the barcode data To delete the barcode from your text Check DIG CodeWidth Small Check DIG OFF Code Label Code TroubleshootingProblem Remedy Error Message List CAN’T BufferEmpt Y FUL L Invalid ProblemFunction Not Allowed System ErrorSE T Lengt H LCD Technical Support ContactsHardware Software