General Precautions | Panduit LS7 specification

GENERAL PRECAUTIONS

WARNING: Observe the following warnings in order to avoid damage to the LS7 or its acces sories.

●Use only Panduit LS7 tapes with this machine (green colored cassettes).

●Use only the LS7-ACS, AC adapter designed exclusively for this machine. Use of any other adapter will void the warranty.

●Do not use the machine in dusty places, and keep it out of both direct sunlight and rain.

●Do not expose the machine to high temperatures or high humidity. Never leave it on the das hboard or in the back of your car.

●Do not touch the print head mechanism. If the head is touched, clean it immediately with a cotton s wab to avoid permanent damage.

●Do not pull on the tape being fed from the LS7. This may damage the tape cassette.

CAUTI ON: Observe the following cautions in order to prevent malfunction of the LS7.

●When the AC adapter (LS7-ACS) is connected, unplugging the adapter from the electri- cal outlet before unplugging it from the machine can delete all text files in the memory, even if batteries are installed.

●Use six AA (AM3, LR6) alkaline batteries in this machine.

4

Image 7

Panduit LS7 manual General Precautions

Contents

Page Contents Page Getting started Do Not Operate In Wet Or Damp Areas Introduction and Safe OperationSafe Operation Practices Do Not Operate In An Explosive Environment Information to USA Users Information to Canadian Users General Precautions Warranty Information TOP View General DescriptionBottom View LS7 Keyboard & LCD Display To change the batteries Batteries To connect the optional AC adapter Optional AC Adapter To change the LS7 tape cassette Tape Cassette Label Code Label CodeTape Width Laminated Industrial Tape Laminated Industrial Tape Separator Tool Print Head & Rollers To clean the print head and rollers Print head Rollers Tape Cutter To clean the tape cutter bladesBe careful not to touch the cutter blades with bare hands Carrying Case For your Information To turn on the machine Power KEYTo turn off the machine Code KEY Code & Caps Keys To type capital letters continuous ly Caps KEY Left Cursor KEY Cursor KeysRight Cursor KEY Down Cursor KEY UP Cursor KEY To add a space Space KEY Is used to end a Return KEY To add a new line of text 1John Smith To apply a selected item 1DATA To delete one character Backspace KEYTo delete a sequence of characters To quit a function without changing your text To delete all of the text Clear Function Accented characters Accent FunctionTo type in an accented character Èéëêe Accent1NOË Symbols Symbol FunctionTo type in a symbol 1PHONE To turn on or off the length function Length FunctionTo set the length of the label Length Length inch Size Function Setting Size PointsTape width Sizes in points Tape Width Text 12 mm To change the size settingSize Auto While still holding down Code , con OFF To change the underline settingUnderline Function Underline Round Slant DOT Frame FunctionTo change the frame s etting DOT Frame Left Horizontal Alignment FunctionLeft Center Right Alignment Mirror Printing Function To change the mirror printing settingMirror Copies Print KEY, Copies & Feed Functions To use the numbering function Serialization Function END Value SerializeNumeric Start Value Rotate Legend Function To enable the rotate legend function Increment Repeat Legnd Repeat Legend FunctionRotate Legnd 01.00 Right Edge To enable/dis able the line functionLine Drawing Function Vertcl Line Increment by Press Function To enable the page function 1A207 Label Storing Text Memory File FunctionsTo store a text file To recall a text file Recalling TextDeleting a File To overwrite the stored file with the new one Press Or pres s just BS Press the key File Store Recall File File Clear Barcode Function To add the barcode to your text To change the barcode parameter settingsSymbol Character To add a special character to the barcode data To delete the barcode from your text Check DIG CodeWidth Small Check DIG OFF Code Problem Remedy TroubleshootingLabel Code Error Message List CAN’T BufferEmpt Y FUL L Invalid ProblemFunction Not Allowed System ErrorSE T Lengt H LCD Technical Support ContactsHardware Software