Panduit LS7 instruction

Information to USA Users

NOTE: This printer has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference when the printer is operated in a commercial environment. This printer generates, uses, and can radiate radio frequency energy and, if not used in accordance with this instruction manual, may cause harmful interference to radio communications . Operation of this printer in a residential area is likely to cause interference in which case the user will be required to correct the interference at his own expense.

Information to Canadian Users

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la clas s A est conforme à la norme NM B-003 du Canada.

It is poss ible that infrequent electrical phenomena (static discharge, power line fluctuations) may cause printer function to be temporarily interrupted. In this case, the printer will usually reset itself. In extreme cases, the user s hould remove then re-apply power (battery and/or AC Adapter).

3

Image 6

Panduit LS7 manual Information to USA Users Information to Canadian Users

Contents

Page Contents Page Getting started Do Not Operate In An Explosive Environment Introduction and Safe OperationSafe Operation Practices Do Not Operate In Wet Or Damp Areas Information to USA Users Information to Canadian Users General Precautions Warranty Information General Description TOP ViewBottom View Keyboard & LCD Display LS7 Batteries To change the batteries Optional AC Adapter To connect the optional AC adapter Tape Cassette To change the LS7 tape cassette Label Code Label CodeTape Width Laminated Industrial Tape Separator Tool Laminated Industrial Tape To clean the print head and rollers Print Head & Rollers Print head Rollers To clean the tape cutter blades Tape CutterBe careful not to touch the cutter blades with bare hands Carrying Case For your Information Power KEY To turn on the machineTo turn off the machine Code & Caps Keys Code KEY Caps KEY To type capital letters continuous ly Cursor Keys Left Cursor KEYRight Cursor KEY UP Cursor KEY Down Cursor KEY Space KEY To add a space Return KEY Is used to end a 1John Smith To add a new line of text 1DATA To apply a selected item Backspace KEY To delete one characterTo delete a sequence of characters To quit a function without changing your text Clear Function To delete all of the text Accent Function Accented charactersTo type in an accented character Accent Èéëêe1NOË Symbol Function SymbolsTo type in a symbol 1PHONE Length Function To turn on or off the length functionTo set the length of the label Length inch Length Setting Size Points Size FunctionTape width Sizes in points Auto To change the size settingSize Tape Width Text 12 mm While still holding down Code , con Underline To change the underline settingUnderline Function OFF Frame Function Round Slant DOTTo change the frame s etting Frame DOT Alignment Horizontal Alignment FunctionLeft Center Right Left To change the mirror printing setting Mirror Printing FunctionMirror Print KEY, Copies & Feed Functions Copies Serialization Function To use the numbering function Start Value SerializeNumeric END Value To enable the rotate legend function Rotate Legend Function Increment Repeat Legend Function Repeat LegndRotate Legnd 01.00 Vertcl Line To enable/dis able the line functionLine Drawing Function Right Edge Press Increment by To enable the page function Function Label 1A207 Memory File Functions Storing TextTo store a text file To overwrite the stored file with the new one Recalling TextDeleting a File To recall a text file File Store Press Or pres s just BS Press the key File Recall File Clear Barcode Function To add a special character to the barcode data To change the barcode parameter settingsSymbol Character To add the barcode to your text To delete the barcode from your text Check DIG OFF CodeWidth Small Check DIG Code Troubleshooting Problem RemedyLabel Code Error Message List FUL L BufferEmpt Y CAN’T Not Allowed ProblemFunction Invalid Lengt H ErrorSE T System Software Technical Support ContactsHardware LCD