49
REPEAT LEGEND FUNCTIONThe repeat legend function is used to duplicate a legend over the length of a label. Using the
combined fu nctio na lity of rotat ed le gen d and r epeat le gend pr oduces an excellent quality
label for marking cables and wires prior to or after installation.
To enable the repeat legend function for marking wires or other curved surfaces:
1 Hold down and press unti l “ON” appears in the display.
2 Hold down and press unti l “ON” appears in the display.
☞When Repeat Legend is enabled, Length must be ON and the largest font avail-
able is 6 pt.
Uses: Wire and cable marking
EXAMPLE
To print a wire marker with length of 1.0” that reads “D101” using LS7-75-1 cassette:
1 Hold dow n and press
until ON is displayed. Release .
2 Hold down and pres s
until ON is displayed. Release .
Code
X
Repeat
d
Code
Space
RotateQ
Length
Length
Rotate A
A
AAAAuto
Underline
Frame
Repeat
Legend
ON
REPEAT LEGND
Code
X
Repeat
g
end
Code
Length
Rotate A
A
AAAAuto
Underline
Frame
Repeat
Legend
ON
ROTATE LEGND
Code
Space
RotateCode