Pantech 5U010344000REV00 manual Common Settings

Messages

❷Select a message and press the [Send] Soft key ([]]) to send the selected template.

Settings

Before you can send or receive messages using your phone, you must configure their settings first. This information is normally pre-populated in the phone by your service provider.

Press the [Menu] Soft key, select 6.Messages, and then select 9.Settings.

Common Settings

Select [Menu], select 6.Messages, select 9.Settings, select 1.Common Settings, and press the [o] key.

To set up common message settings, use the following functions:

•Default Edit Mode: Sets in Alphabet mode (Multi-tap mode) or Predictive mode (T9 mode).

•Save messages: If set as On, the messages sent will be stored in the [Sent].

Text Message

To set up default Text Message information, use the following functions:

•Message Center: Stores or changes the number of your message center that is required when sending a message.

•E-mail Gateway: Stores or changes the number of your e-mail gateway required when sending an e-mail.

•Save to: Sets the text message storage to SIM or phone.

•Message Format: Sets the message type to Normal, Fax, Voicemail, ERMES, National Paging, X.400, or Internet. The network converts the messages into the selected format.

•Delivery Reports: When this option is set to [On], the network informs you whether or not your message has been delivered successfully.

•Message Lifetime: Sets the duration of time your message is stored at the message center while attempting to deliver it. You can select one of 1 Hour,

2 Hours, 6 Hours, 1 Day, 2 Days, 1 Week, 4 Weeks, 6 Months, or Maximum.

NOTE The message format depends on the SIM.

Press the [Menu] Soft key, select 6.Messages, select

609.Settings, select 2.Text Message, and press the [o] key.