Pantech C300 manual For further details, see Graphics on

Messaging

your message has been read. (if your carrier’s network supports this functionality)

•Priority: Set Normal, High, or Low.

•Cc (Carbon copy): Sends the message to both the recipient and the third party.

•Bcc (Blind carbon copy): Sends the message to the third party but does not notify the other recipient.

❷When [No Subject] page displays, press the [Add] Soft key ([]]) to add an objects.

•Add Text: Adds a new text.

•Add Image: Adds the photo or the downloaded image. Press the [o] key to select the sub-menu.

•Take a Photo: Creates a new photo

•Photo Album: Already saved photo

•Downloaded: Downloaded image.

(For further details, see Graphics on page 64.)

•Add Sound: Adds the voice memo or the downloaded sound. Press the [o] key to select the sub-menu.

•New Voice Memo: Creates a new recording memo

•Voice Memo: Already recorded sound

•Downloaded: Downloaded sound

44(For further details, see Audio on page 63 and Voice

06.04.03_C300_EN_REV00.indd 44

Memo on page 68.)

•Add Slide: Adds a new slide.

NOTE After you add the text, the image or the sound, the Add Slide menu appears if you press the [Add] Soft key ([]]). To move to a different slide, press the [l/r] key.

❸After writing the message, press the [o] key. And then press the [Options] Soft key ([[]) to use the following [Editor Options].

•Preview: Shows the message as it appears on the recipient’s phone, and you can return to the Editor to press the [Editor] soft key ([[]).

•Delete Text/Image/Sound/Slide: Deletes the selected text, image, sound or slide from the slide page.

•Add Objects: Adds an image, sound, and slide objects.

•Save as Draft: Saves messages in the phone memory.

•Delete Slide: Deletes the selected slide.

NOTE When more than one slide exists, this menu appears.

•Edit Subject: Edits the subject.

•Settings: The user can only change the setting for the message which is in the process of being written regardless of the global settings. To find those settings, press [Menu] Soft key select 2.Messaging, select 8.Settings, and then select 3.Multimedia Message.

2006.4.4 11:53:28 AM