28 | L | | | |
| | | |
49 | 17 | | | |
| | | |
(d) | | | | |
(c) | 28 | L | | 28 |
49 | | | |
| A | | | |
| | | 49 | |
17 3/8 X 1-3/4” | 17 | 3/8 X 1-3/4” | (b) |
(a) | | 28 | | |
| | | |
| B | | | |
| 30 | 49 | | |
| 10 3/8 X 4” | | | |
| 11 3/8 X 3-3/4” | | | |
FIGURE 28 | | | |
STEP 28:
•Assemble one 3-1/2” PULLEY (49) to the BASE PLATES (B) using one 3/8 X 4” BOLT (10), one 3/8 X 15/16” SPACER (30) and one 3/8” LOCK NUT (28). See FIGURE 28(a) (Note: Loop the LOW CABLE (AW) around the PULLEYprior to assembling the PULLEYto the
BASE PLATES.)
•Route the LOW CABLE (AW) around one 3-1/2” PULLEY (49) and assemble the 3-1/2” PULLEY (49) to the PULLEY PLATES (L) using one 3/8 X 1-3/4” BOLT (17) and one 3/8” LOCK NUT (28). See FIGURE 28(b)
•Assemble one 3-1/2” PULLEY (49) to the BASE PLATES (B) using one 3/8 X 3-3/4” BOLT (11), one 3/8 X 15/16” SPACER (30) and one 3/8” LOCK NUT (28). See FIGURE 28(a) (Note: Loop the LOWCABLE (AW) around the PULLEYpriorto assembling the PULLEYto the BASE PLATES.)
•Route the LOW CABLE (AW) around one 3-1/2” PULLEY (49) and assemble the 3-1/2” PULLEY (49) to the bracket on the BASE (A) using one 3/8 X 1-3/4” BOLT (17) and one 3/8” LOCK NUT (28). See FIGURE 28(c)
•Route the LOW CABLE (AW) around one 3-1/2” PULLEY (49) and assemble the 3-1/2” PULLEY (49) to the PULLEY PLATES (L) using one 3/8 X 1-3/4” BOLT (17) and one 3/8” LOCK NUT (28). See FIGURE 28(d)
26
