Paradise 205486 REV F Installation, Introduction, Inspection, Prime Power Connection MS3102E20-3P

Section 2: Installation

2.0 Introduction

This section provides information for the initial inspection, installation, external connections, and shipment of the Compact Outdoor SSPA unit.

2.1 Inspection

When the unit is received, an initial inspection should be completed. First ensure that the shipping container is not damaged. If it is, have a representative from the shipping company present when the container is opened. Perform a visual inspection of the Compact Outdoor Amplifier to make sure that all items on the packing list are enclosed. If any damage has occurred or if items are missing, contact:

Paradise Datacom LLC

328 Innovation Park

State College, PA 16803

Phone: 1 (814) 238-3450

Fax: 1 (814) 238-3829

2.2 Prime Power Connection [MS3102E20-3P]

The Prime power connector is a 3-pin circular connector, J7. The power supplies provide universal AC input by using auto-sensing power supplies. The AC input can operate over a range of 90-265 VAC, at 47 to 63 Hz. The power supply is also power factor corrected, enabling the unit to achieve a power factor greater than 0.93.

The highest output power levels, >70 W @ Ku-Band and >100 W @ C-Band should be powered only from a 180–265 VAC source. This will keep AC line currents to safe operating levels for the internal EMI filter and associated circuitry. The AC Line input connector configuration is given in Table 2-1. The prime power vs. RF output power is summarized in Table 2-2. An option for 110 VAC prime power is available for the higher-powered units.

Table 2-1: AC Line Input Connector

J7 Pin	Connection
A	L1
B	GND
C	L2/N

Operations Manual, HPA2, Compact Outdoor SSPA 205486 REV F 11