Paradise 205486 REV F manual System Settings Data Values

Table 10-6: System Settings Data Values

Data	# Bytes	Description	Limits and Byte Values
Address
1	1	System Operation Mode	Single Amplifier = 255; Dual 1:1 = 1 (version 3.60);
			1:1 Redundant = 0
2	1	System Hierarchical Address	HPA 1= 0; HPA 2= 255
3	1	Unit Start Up State	Standby Amplifier = 0
		(in Redundancy)	On Line Amplifier = 1
4	1	Mute State	Mute Clear (Transmit Enable) = 255
			Mute Set (Transmit Disable) = 0
5	1	Attenuation Level	[1 bit for every 0.1 dB]
			0 dB attenuation = 0
		(dB down from maximum gain)
			20 dB attenuation = 200
6	1	Module Gain Control Authority	Serial Port Gain Control = 255
			External Analog Voltage Gain Control = 0
7	1	Amplifier Network Address	0 to 255
8	1	High Temperature Alarm Threshold	0 to 125 (in oC)
9	1	SSPA module Calibration Mode	Temperature Compensated = 255 (normal state)
			Calibration Mode = 0
10	1	SSPA Spare Fault Status	Ignore Spare Fault = 255
			Fault on value of window on ADC channel = 0 to 7
			Fault on External Mute = 8
			Minor Fault (no effect on Summary Fault) = 255
11	1	SSPA Spare Fault Handling	Major Fault (Triggers Summary Fault) = 0
			Major Fault with Mute (Transmit Disabled) = 1
			Ignore Auxiliary Fault = 255
			Fault on Logic Low State = 1
12	1	SSPA Auxiliary Fault Status	Fault on Logic High State = 0
			Startup in Low Z State = 2
			Startup in High Z State = 3
			(version 3.50 - See SierraCom Protocol for details)
			Minor Fault (No effect on Summary) = 255
13	1	SSPA Auxiliary Fault Handling	Major Fault (Triggers Summary Fault) = 0
			Major Fault with Mute (Transmit Disabled) =1
			Minor Fault with Mute = 2 (version 3.50)
14	1	Block Up Converter Fault Status	Ignore BUC Fault = 255
			Fault on Logic Low State = 1
			Fault on Logic High State = 0
			Minor Fault (no effect on Summary Fault) = 255
15	1	Block Up Converter Fault Handling	Major Fault (Triggers Summary Fault) =0
			Major Fault with Mute (Transmit Disabled) = 1
			Standard String Protocol = 255
			Terminal Mode = 0
16	1	Protocol Select	Binary Mode (compatible with CO SSPA serial
			numbers 100,001 - 199,999) = 1
			SierraCom Protocol = 2 (version 3.50; compatible with
			SierraCom VSAT BUC and NDSat SkyWAN modem, see
			Appendix D for details)
			9600 = 255
			38400 = 0
17	1	Baud Rate Select	19200 = 1
			4800 = 2
			2400 = 3
18-19	2	Reserved	Reserved for Factory use.
20	1	Standby Mode	Hot standby=255; Cold standby=0 (version 3.50)
21	1	BUC Reference	Autoswitch = 0; External = 1; Internal = 2 (version 3.60)

Note: Data length must be at least two bytes to form integer with the lower byte sent first. If odd number of bytes is received, the last byte will be saved as the lower byte of the integer and upper part will be zero.

Operations Manual, HPA2, Compact Outdoor SSPA 205486 REV F 93