Paradise 205486 REV F 4:Universal M&C Settings Window, RF Power Indicator, Carrier Enable

3.9.1.5 RF Power Indicator

The RF Power indicator is the vertical meter in the central part of the Operation window. This indicator reports the approximate output power of the amplifier. It uses the voltage from the RF Power Detector to determine a corresponding power level in dBm. The accuracy of the power indicator is ± 1 dB at the mid-point of the specified band, with a single CW or QPSK carrier.

3.9.1.6 Carrier Enable

This button toggles between the “Enabled” and “Muted” conditions. This software mute requires 70 msec maximum (30 msec typical) to take effect.

3.9.2 Settings Window

Figure 3-4 shows the ‘Settings’ window of the Paradise Datacom Universal Monitor & Control Software. The ‘Settings’ window contains many of the global settings that are available in the SSPA.

Figure 3-4: Universal M&C Settings Window

Operations Manual, HPA2, Compact Outdoor SSPA 205486 REV F 33