8.3.1 1:1 Fixed Phase Combined System with L-Band Input Components

An outline drawing of a 1:1 Fixed Phase Combined Amplifier with L-Band Input assembly is shown in Figure 8-6 on the following page. The system consists of:

(1)Amplifier Base Assembly, which comprises:

(1)Mounting Base (Frame or Plate)

(2)Compact Outdoor SSPAs

(1) Waveguide Switch Assembly

(1)Signal Box Assembly with 1:1 Redundant Block Up Converter System

(2)Cable Assemblies between SSPAs and Signal Box

(1)FPRC-1100 1:1 Phase Combined Redundant Controller

(2)Cable Assemblies between Signal Box and FPRC-1100

(2) AC line cables

(1)Quick Start RS-232 Cable for test / debug

8.3.2Signal Box Assembly

The Signal Box Assembly contains the Redundant BUC Assembly including the coaxial switch, the RF input isolator and splitter that routes the RF to each amplifier. It also routes the monitor and control signals from each amplifier back to the FPRC-1100.

The signal box also contains a phase shifter. This phase shifter is in cascade with the RF input to HPA 1. This allows the system to achieve optimum power combining and is factory set for optimum combining across the full bandwidth of the amplifier. It should not normally require adjustment in the field unless and amplifier has been replaced.

8.3.3 Redundant BUC Operation

The 1:1 Fixed Phase Combined System with L-Band Input is built utilizing a chain redundancy architecture. This means if a Block Up Converter which is connected in series with an SSPA fails, the SSPA will also fault. This will disable the system’s ability to phase combine until the fault with the BUC is corrected.

Note: With the addition of an RCP2-1100, the BUCs can function as an independent, fully redundant 1:1 system that is not affected by the 1:1 phase combined SSPA’s status.

8.3.4 Identifying a BUC Fault vs. SSPA Fault

In the event an SSPA or BUC would cause a fault, the FPRC-1100 will show this as a summary alarm on the front panel. The BUC fault is recognized by the SSPA via the Auxiliary Alarm input to the SSPA. The SSPA will recognize this fault as a Major Fault, and will switch the BUC offline, along with itself.

In order to identify which device is faulted, access the system information screen on the FPRC-1100. Scroll down until the screen displays the EXT FAULT: AUX FAULT section. If BUC 1 is faulted, the Auxiliary Fault will display AUX11101. If BUC 2 is faulted, the Auxiliary Fault will display AUX11110. If the Auxiliary Fault displays AUX11100 then no BUC fault is present and the fault is with the SSPA. The faulted SSPA is identified by the red LED on the front panel of the FPRC-1100.

Operations Manual, HPA2, Compact Outdoor SSPA

205486 REV F

73

Page 73
Image 73
Paradise 205486 REV F manual Redundant BUC Operation, Identifying a BUC Fault vs. Sspa Fault

205486 REV F specifications

Paradise 205486 REV F is an innovative and cutting-edge solution that promises to reshape the landscape of various industries, primarily through its focus on sustainability, efficiency, and advanced technology integration. This model has garnered attention for its unique features that set it apart from its predecessors.

One of the main features of Paradise 205486 REV F is its environmentally friendly design. It utilizes sustainable materials in its construction, reducing the overall carbon footprint while promoting energy efficiency. This approach not only helps in conserving natural resources but also aligns with global efforts to combat climate change. The use of recyclable materials ensures that the product remains viable even at the end of its lifecycle.

Furthermore, the integrated technologies of Paradise 205486 REV F reflect a modern approach to automation and connectivity. It is equipped with advanced IoT (Internet of Things) capabilities, allowing for real-time data monitoring and analytics. This means users can track performance metrics and gather insights that drive informed decision-making. The system's connectivity with smart devices ensures seamless communication, enhancing user experience and operational efficiency.

The model also incorporates artificial intelligence that enables predictive maintenance and operational optimization. By analyzing data patterns, the AI system can foresee potential issues and address them before they escalate, minimizing downtime and ensuring continuous productivity. This feature is particularly valuable in industrial applications where time is critical.

Another standout characteristic of the Paradise 205486 REV F is its modular design. This flexibility allows users to customize configurations based on specific needs, ensuring that the solution can adapt to various environments and uses. Whether intended for industrial, commercial, or residential applications, the model can be tailored to suit various operational requirements, enhancing overall user satisfaction.

Moreover, the user interface is designed for intuitive interaction. With a focus on user-friendliness, the interface ensures that both expert users and beginners can navigate and utilize the system effectively. Comprehensive training and support resources further complement this, making the transition to the new system smooth and efficient.

In conclusion, Paradise 205486 REV F represents a significant advancement in sustainable technology. With its commitment to environmental stewardship, integration of cutting-edge IoT and AI technologies, and customizable modular design, it serves as a forward-thinking solution that meets the demands of today and anticipates the needs of tomorrow. This model not only elevates operational efficiency but also emphasizes the importance of sustainability in technological advancements.