1. Network Management Specification
2.Standards Compliance for SNMP Traps
This section describes the standards compliance and any special operational features/options for the SNMP Traps supported by the GranDSLAM 3.0 products. The following traps are supported.
Table 1-4. Summary of Traps (1 of 7)
Trap | Description | VarBind(s) |
|
|
|
| Standard Traps |
|
|
|
|
LinkDown | Signifies that the unit has recognized a | ifIndex(RFC 2863) |
| failure in one of the communication | ifAdminStatus(RFC 2863) |
| interfaces. | |
|
| |
|
| ifOperStatus(RFC 2863) |
|
| devLastTrapString |
|
|
|
LinkUp | Signifies that the unit recognized that one | ifIndex(RFC 2863) |
| of the communication interfaces has come | ifAdminStatus(RFC 2863) |
| up. | |
|
| |
|
| ifOperStatus(RFC 2863) |
|
| devLastTrapString |
|
|
|
WarmStart | Signifies that the SNMPv2 entity, acting | devLastTrapString |
| in an agent role, is reinitializing itself such |
|
| that its configuration is unaltered. |
|
|
|
|
AuthenticationFailureTrap | Signifies that the SNMPv2 entity, acting | devLastTrapString |
| in an agent role, has received a protocol |
|
| message that is not properly |
|
| authenticated. While all implementations |
|
| of the SNMPv2 must be capable of |
|
| generating this trap, the |
|
| snmpEnableAuthenTraps object indicates |
|
| whether this trap will be generated. |
|
|
|
|
| DSX Traps |
|
|
|
|
dsx1LineStatusChange
value of an instance dsx1LineStatus changes
ifIndex,
dsx1LineStatus,
dsx1LineStatusLastChange
devLastTrapString
ATM-M4 Traps
atmfM4IfAisAlarm | AIS condition has occurred. |
|
|
atmfM4IfLcdAlarm | LCD (Loss of Cell Delineation) condition |
| has occurred. |
|
|
atmfM4IfLosAlarm | LOS (Loss of Signal) condition has |
| occurred. |
|
|
ifIndex,
ifOperStatus,
atmfM4TrapAlarmSeverity
devLastTrapString
June 2003 | 7 |