1. Network Management Specification
Write access to this object is not supported |
| ||
Table | atmInterfaceMyNeighborIpAddress |
| |
|
|
|
|
Interface |
| atmInterfaceMyNeighborIpAddress | Access |
|
|
|
|
DSLATM |
| 0.0.0.0 | |
|
|
|
|
ATMUP |
| 0.0.0.0 | |
|
|
|
|
AAL5 |
| 0.0.0.0 | |
|
|
|
|
6.1.1.10“atmInterfaceMyNeighborIfName” Object (atmInterfaceConfEntry 12)
In Hybrid Management Model, the value of this object contains the textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string.
Write access to this object is not supported
Table | atmInterfaceMyNeighborIfName |
| |
|
|
|
|
Interface |
| atmInterfaceMyNeighborIfName | Access |
|
|
|
|
DSLATM |
| zero length string | |
|
|
|
|
ATMUP |
| zero length string | |
|
|
|
|
AAL5 |
| zero length string | |
|
|
|
|
6.1.1.11“atmInterfaceCurrentMaxVpiBits” Object (atmInterfaceConfEntry 13)
The maximum number of VPI Bits that may currently be used at this ATM interface.
Table 1-49. atmInterfaceCurrentMaxVpiBits
Interface | atmInterfaceCurrentMaxVpiBits |
|
|
DSLATM | 1 |
|
|
ATMUP | 4 |
|
|
AAL5 | 6 |
|
|
44 | June 2003 |