Paradyne 8620 4.1.5 “ifSpeed” Object ifEntry, 4.1.6 “ifPhysAddress” Object ifEntry, Interface

Models: 8620 8820

1 108
Download 108 pages 7.87 Kb
Page 29
Image 29
4.1.5“ifSpeed” Object (ifEntry 5)

1. Network Management Specification

4.1.5“ifSpeed” Object (ifEntry 5)

This object provides the interfaces’s current bandwidth in bits per second. The value of this object for each interface will be specified as follows:

Table 1-10.

ifSpeed

 

 

 

Interface

 

ifSpeed

 

 

 

AAL5

 

0

 

 

 

ATMUP

 

155000000

 

 

 

DSL

 

16000000

 

 

 

DSLATM

 

16000000

 

 

 

DSLChan

 

16000000

 

 

 

E1

 

2048000

 

 

 

ETH

 

100000000

 

 

 

IMA

 

[1544000..8*2048000]

 

 

 

SONET

 

155000000

 

 

 

SONETPath

 

155000000

 

 

 

T1

 

1544000

 

 

 

4.1.6“ifPhysAddress” Object (ifEntry 6)

This object is used to specify the interface’s address at its protocol sub-layer. The interface’s media-specific MIB must define the bit and byte ordering and format of the value contained by this object. For the GranDSLAM 3.0 interfaces, this object should only contain the ethernet address (MAC Address) of the unit. All other interfaces are in blank.

4.1.7“ifAdminStatus” Object (ifEntry 7)

This object is used to specify the desired state (configuration) of the interface. When the GranDSLAM 3.0 initializes, all physical interfaces start with ifAdminStatus in the up(1) state. As a result of either explicit management action or per configuration ifAdminStatus is changed to down(2). The ifAdminStatus values which may be assigned to each interface after initialization are listed in the following table:

8000-A2-GB30-00

June 2003

23

Page 29
Image 29
Paradyne 8620 4.1.5 “ifSpeed” Object ifEntry, 4.1.6 “ifPhysAddress” Object ifEntry, 4.1.7 “ifAdminStatus” Object ifEntry