1. Network Management Specification
6.Link Layer
6.1ATM (AtoM) MIB (RFC 2515)
The ATM MIB provides objects for management of the ATM Cell and AAL5 interfaces. Although primarily associated with
Table 1-38. ATM MIB
Table | Comments |
|
|
atmInterfaceConfEntry | Supported as is |
|
|
atmInterfaceDs3PlcpEntry | Not supported |
|
|
atmInterfaceTCEntry | Supported as is |
|
|
atmTrafficDescrParamEntry | Supported as is |
|
|
atmVplEntry | VP Switching is not supported |
|
|
atmVclEntry | Supported as is |
|
|
atmVpCrossConnectEntry | VP Switching is not supported |
|
|
atmVcCrossConnectEntry | Supported as is |
|
|
aal5VccEntry | Not supported |
|
|
6.1.1ATM Interface Configuration Parameter Group (RFC 2515)
This table contains information on ATM cell layer configuration of local ATM interfaces on an ATM device in addition to the information on such interfaces contained in the ifTable. This table is supported for each ATM interface: Backplane, and Management Processor.
The table, atmInterfaceConfEntry, contains the following objects:
6.1.1.1“atmInterfaceMaxVpcs” Object (atmInterfaceConfEntry 1)
This object contains the maximum number of VPCs supported at this ATM interface. The only valid values for this object are:
Table 1-39. atmInterfaceMaxVpcs
Interface
DSLATM
ATMUP
AAL5
atmInterfaceMaxVpcs
0
0
0
June 2003 | 41 |