1. Network Management Specification
5.3Paradyne ReachDSL MIB (pdn_reachDSL.mib)
This Paradyne enterprise MIB provides objects for configuration of objects specific to ReachDSL devices as well as for Spectrum Management objects specific to ReachDSL products. The various objects supported are shown in the following table.
Table 1-30. ReachDSL MIB
Table | Comments |
|
|
reachDSLSpectrumMgmtSelection | Supported as is |
|
|
reachDSLSpectrumMgmtConfEntry | Supported as is |
|
|
reachDSLSpectrumMgmtLoopMeasurementMethod | Supported as is |
|
|
reachDSLSpectrumMgmtEWLUnits | Supported as is |
|
|
reachDSLSpectrumMgmtMode | Supported as is |
|
|
reachDSLSpectrumMgmtLineInfoEntry | Supported as is |
|
|
reachDSLLineEntry | Supported except for |
| reachDSLCircuitIdentifier. |
|
|
The
5.4DS1 MIB (RFC 2495)
Table
Table | Comments |
|
|
dsx1ConfigEntry | Supported as is |
|
|
dsx1CurrentEntry | Supported as is |
|
|
dsx1IntervalEntry | Supported as is |
|
|
dsx1TotalEntry | Supported as is |
|
|
dsx1ChanMappingEntry | Supported as is |
|
|
dsx1FarEndCurrentEntry | Supported as is |
|
|
dsx1FarEndIntervalEntry | Supported as is |
|
|
dsx1FarEndTotalEntry | Supported as is |
|
|
5.5Paradyne DS1-EXT MIB (PDN-DS1EXT-MIB).
This Paradyne MIB is an extension to the standard DS1 MIB (RFC 2495). This MIB provides additional DS1 and G.703 (E1) configuration objects not provided by RFC 2495.
36 | June 2003 |