Paradyne 8820, 8620 entPhysicalHardwareRev Entity EntPhysicalHardwareRev, EntPhysicalSoftwareRev

1. Network Management Specification

The following table shows the entPhysicalHardwareRev defined for each entity.

Table 1-68. entPhysicalHardwareRev

Entity	entPhysicalHardwareRev
Chassis	zero-length-string
Container	zero-length-string
Module	String containing the Revision Number of the CCA
Splitter card	String containing the Revision Number of the CCA
DSL Port	zero-length-string
T1/E1 port	zero-length-string
OC3 port	zero-length-string
Console port	zero-length-string
Ethernet Mgmt port	zero-length-string
Temp Sensor	zero-length-string
Fan	zero-length-string
PowerSupply	zero-length-string
Management Plane PLD	zero-length-string

7.1.2.1.9entPhysicalSoftwareRev:

The vendor-specific software revision string for the physical entity. If no specific firmware programs are associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string. For the GranDSLAM 3.0 units, this object will always return a zero-length string.

7.1.2.1.10entPhysicalFirmwareRev

The vendor-specific software revision string for the physical entity.

Valid Object Value(s):

The following table shows the entPhysicalFirmwareRev assigned for the entities.

Table 1-69. entPhysicalFirmwareRev (1 of 2)

Entity	entPhysicalFirmwareRev
Chassis	zero-length-string
Container	zero-length-string
Module	A String with the currently Firmware running in this module.
Splitter card	zero-length-string
DSL Port	A String reflecting the DSP revisions
T1/E1 port	zero-length-string
OC3 port	zero-length-string

62 June 2003 8000-A2-GB30-00