Paradyne 8820, 8620 manual pdnRedunCommand, pdnRedunAlarmStatus, pdnRedunEntityState

Models: 8620 8820

1 108
Download 108 pages 7.87 Kb
Page 88
Image 88
7.8.4.1pdnRedunCommand.

1. Network Management Specification

7.8.4.1pdnRedunCommand.

This MIB object allows managers to command an action to an entity module (given by the entPhysicalIndex), configured for redundancy. The supported commands are switch(2) and forceswitch (3). The value noCmd (1) will be returned when no previous command had been issued. Users should specify the slot-based entPhysicalIndex (for example, 1190001) corresponding to the entity that will take the action.

7.8.4.2pdnRedunAlarmStatus.

This MIB object displays the status of any outstanding major alarms in an entity of a redundant configuration. If no major alarms are present, this object will return 0. This MIB object is a Bitmap to report multiple major alarm conditions. This MIB object is indexed by the slot-based entPhysicalIndex (for example, 1190001).

7.8.4.3pdnRedunEntityState.

This MIB object displays the state of each entity module configured for redundancy. The possible states reported are: activeState (1), activeAlarmState (2), standbyState (3), standbyAlarmState (4). This MIB object is indexed by the slot-based entPhysicalIndex (for example, 1190001).

7.8.4.4pdnRedunNotificationEnable.

This MIB object provides the ability to enable and disable the generation of traps related to redundancy in the specified entity. The default value of this object is disable. This MIB object is indexed by the slot-based entPhysicalIndex (for example, 1190001).

82

June 2003

8000-A2-GB30-00

Page 88
Image 88
Paradyne 8820, 8620 manual pdnRedunCommand, pdnRedunAlarmStatus, pdnRedunEntityState, pdnRedunNotificationEnable