1. Network Management Specification
7.1.2.1.5entPhysicalClass
An indication of the general hardware type of the physical entity.
Valid Object Value(s):
The following table shows the different classes identified for the ATM stackable DSLAM’s entities.
Table 1-65. entPhysicalClass
Entity | entPhysicalClass |
|
|
Chassis | chassis (3) |
|
|
Container | container (5) |
|
|
Module | module (9) |
|
|
Splitter card | module (9) |
|
|
DSL Port | port (10) |
|
|
T1/E1 port | port (10) |
|
|
OC3 port | port (10) |
|
|
Console port | port (10) |
|
|
Ethernet Mgmt port | port (10) |
|
|
Temp Sensor | sensor (8) |
|
|
Fan | fan (7) |
|
|
PowerSupply | powersupply (6) |
|
|
Management Plane PLD | other (1) |
|
|
7.1.2.1.6entPhysicalParentRelPos
An indication of the relative position of this “child” component among all its “sibling” components. Sibling components are defined as entPhysicalEntries
Valid Object Value(s):
The following table shows the entPhysicalParentRelPos relationship among the entities.
Table 1-66. entPhysicalParentRelPos (1 of 2)
Entity | entPhysicalParentRelPos |
|
|
Chassis | |
|
|
Container | Position of this container in the chassis [1..20] |
|
|
Module | Position of this module in the slot container. Should be equal to 1 |
|
|
Splitter card | 3 |
|
|
DSL Port | A value between [1..24] |
|
|
60 | June 2003 |