1. Network Management Specification
6.1.1.6“atmInterfaceMaxActiveVciBits” Object (atmInterfaceConfEntry 6)
This object contains the maximum number of active VCI bits configured for use at this ATM interface.
Table | atmInterfaceMaxActiveVciBits | |
|
|
|
Interface |
| atmInterfaceMaxActiveVciBits |
|
|
|
DSLATM |
| 6 |
|
|
|
ATMUP |
| 10 |
|
|
|
AAL5 |
| 6 |
|
|
|
6.1.1.7“atmInterfaceIlmiVpi” Object (atmInterfaceConfEntry 7)
6.1.1.8This object contains the VPI value of the VCC supporting the ILMI on the ATM Interface. “atmInterfaceIlmiVci” Object (atmInterfaceConfEntry 8)
Table | atmInterfaceIlmiVpi |
| |
|
|
|
|
Interface |
| atmInterfaceIlmiVpi | Access |
|
|
|
|
DSLATM |
| 0 | |
|
|
|
|
ATMUP |
| 0 | |
|
|
|
|
AAL5 |
| 0 | |
|
|
|
|
This object contains the VCI value of the VCC supporting the ILMI on the ATM Interface. .
Table | atmInterfaceIlmiVci |
| |
|
|
|
|
Interface |
| atmInterfaceIlmiVci | Access |
|
|
|
|
DSLATM |
| 0 | |
|
|
|
|
ATMUP |
| 16 | |
|
|
|
|
AAL5 |
| 0 | |
|
|
|
|
6.1.1.9“atmInterfaceMyNeighborIpAddress” Object (atmInterfaceConfEntry 11)
In Hybrid Management Model, the value of this object contains the IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system.
Implementation Note: for those ATM interfaces over xDSL interfaces, the value of this object is obtained from NMS station when the endpoint IP address is assigned for the purpose of the persistent management of the endpoint.
June 2003 | 43 |