http://www.nettonet.com/support/docs for specific information such as connector pinouts, parameter configurations and distance capabilities.
1.8 Secure the Connecting Cables
Position all connecting cables such that they will not become a tripping hazard or pull loose from the chassis; secure with cable ties or velcro straps.
2.0 CONFIGURATION AND MANAGEMENT
Although no configuration is necessary to run subscriber lines at Net to Net Technologies' default settings, all IPD4000E parameter settings are software selectable via Command Line Interface (CLI), Simple Network Management Protocol (SNMP) and/or Net to Net's Network Management System (NMS). IPD4000E management capabilities depend upon the management module model installed in your chassis. Once the management module has been initialized, the interface modules installed in your IPD4000E may also be configured as desired.
Refer to the following documentation at http://www.nettonet.com/support/docs for further information:
DOCUMENT
management module installation instructions
uplink module installation instructions
interface module user guides
CLI Management User Guide
NMS Management User Guide
CONTENTS
module installation port pinouts parameter defaults parameter configuration options management system capabilities
module installation port pinouts parameter defaults parameter configuration options
module installation
distance and bandwidth capabilities port pinouts
parameter defaults
parameter configuration options
management module initialization instructions command user guide
command definitions
configuration options common to all management module models configuration options common to all interface module models
management module initialization instructions screen by screen user guide
parameter definitions
configuration options common to all management module models configuration options common to all interface module models
IPD4000E Installation Instructions | Page 14 of 17 |
